Водонепроницаемый соединительный кабель от M12A-04P-A до M8A-04P
Водонепроницаемый кабель от M12A-04P-A до M8A-04P для подключения датчика/исполнительного устройства. Имеет степень защиты IP67, позолоченные контакты для низкого сопротивления, корпус PA66 и двухэтапное литье под давлением для долговечности в условиях от -20 до +80 ℃.
Композитный RF/силовой кабель SMA
Characteristic impedance of the product is 50Ω (75Ω customizable). Operating frequency: DC to GHz. It features low VSWR: standard ≤1.5. The cable boasts high voltage resistance and low leakage, with excellent RF signal isolation to suppress outward radiation interference. Matched with RG316 coaxial cable, it delivers high temperature resistance and low signal loss. An additional power wire is integrated to supply power to instruments simultaneously.
25-контактный D-Sub на 15-контактный D-Sub + 9-контактный D-Sub с двойным экраном/коаксиальный кабель
This single‑end D‑Sub 25PIN splitter harness features one cable diverging into two branches. It terminates with a D‑Sub 15PIN signal channel and a standalone coaxial RF line with D‑Sub 9PIN connectors, enabling simultaneous transmission of serial control signals, analog video signals and high‑frequency RF signals. The communication cable adopts a double composite shielding structure to deliver robust resistance against EMI and RFI interference. Coaxial cables are available in
OBD II 16-контактный разъем для OBD II 16-контактный разъем + сетевой порт RJ45
The product is equipped with an additional RJ45 network port, enabling communication between vehicle CAN bus, automotive Ethernet and standard IP networks. It supports high-speed DoIP diagnostics and network-based transmission of vehicle data.
Жгут адаптеров OBD II с внутренней резьбой
The connector housing adopts PA66 material with flame rating UL94 V‑0. The cable is constructed from PUR material, featuring oil corrosion resistance, UV resistance and crack resistance under repeated bending.
Электромобильная релейная проводка
Main contactors for high-power charging of AEV/EV-B, adopting 2-core standard cables equipped with Yakazi (7282-1020) connectors. No wire modification or adapter conversion required, delivering zero assembly tolerance error. The cable model complies with UL3266, 22AWG, constructed with XLPE halogen-free flame-retardant material. Its maximum operating temperature reaches 125°C, conforming to ELV automotive environmental regulations.
EE-SX674-WR Кабель фотоэлектрического датчика
Integrated U-shaped slot with integrated emitter and receiver, slot width 5mm, capable of detecting thin blocking sheets ≥2×0.8mm; clearance tolerance ≤0.025mm, ultra-high positioning repeatability with zero offset for home position limit. Adopts 940nm DC infrared light source, resistant to strong workshop light and fluorescent lamp interference to avoid false triggering. Response time 0.17ms, maximum detection frequency up to 1kHz, suitable for high-speed assembly lines and
9-контактный последовательный кабель D-Sub RS232
The connector is fitted with built‑in metal fixing screws at both ends. After tightening, it will not loosen due to vibration or pulling force, which is suitable for permanent fixed wiring, on‑board vehicle equipment and high‑vibration working environments. Adopting industrial‑grade galvanized full‑metal shielding, it can effectively suppress signal interference. Operating temperature range: −40 to 85 ℃. Withstand voltage: AC 1000V/ 1 min. Insulation resistance: ≥ 1000 MΩ.
