USB BF to PH1.25‑4P Communication Cable
The contacts of USB‑BF are gold‑plated for anti‑oxidation performance, with a mating durability of ≥ 10,000 insert‑pull cycles. Built‑in M3 nuts inside the plug enable direct mounting onto equipment enclosures and industrial‑control panels with M3 screws. This USB 2.0 connector supports a transfer ...
SF1210/P3 to PT100 Temperature Sensor
SF12 push‑pull self‑locking circular connector perfectly matches 3‑wire PT100 platinum‑resistance sensors. It features a resistance value of 100 Ω at 0 °C and complies with the IEC 60751 standard. The 3‑wire design eliminates resistance errors caused by connecting cables. Built with a 1210‑packaged ...
Micro‑Flex Coaxial RF Cable
Gold‑plated phosphor‑bronze spring contacts mate with the inner conductors of coaxial cables for RF high‑frequency signal transmission. The gold‑plating prevents oxidation and delivers low impedance, compatible with high‑frequencies up to 56 GHz. This ultra‑fine RG1.13 cable features Teflon ...
TPU/PUR Coiled Cable
Constructed from TPU / PUR materials. The static coiled cable can stretch to 3‑5 times its original length and retracts automatically and promptly upon release. Its rated voltage stands at 300 / 500 V, compatible with low‑voltage signal transmission and power supply. The cable maintains stable ...
SMA Radio‑Frequency / Power Composite Cable
Characteristic impedance of the product is 50 Ω (75 Ω customizable). Operating frequency: DC to GHz. It features low VSWR: standard ≤ 1.5. The cable boasts high‑voltage resistance and low leakage, with excellent RF‑signal isolation to suppress outward‑radiation interference. Matched with RG316 ...
D‑Sub 25‑pin to D‑Sub 15‑pin + D‑Sub 9‑pin Double‑Shielded Coaxial Cable
This single‑end D‑Sub 25‑PIN splitter harness features one cable diverging into two branches. It terminates with a D‑Sub 15‑PIN signal channel and a standalone coaxial RF line with D‑Sub 9‑PIN connectors, enabling simultaneous transmission of serial‑control signals, analog‑video signals and high...
HD16‑9‑1939S80 to D‑Sub 26‑pin Diagnostic Cable
The D‑Sub 26‑PIN connector adopts the industry‑standard 3‑row 26‑pin layout with locking screws, enabling secure direct mounting on equipment panels. The J1939 Type 2 circular connector supports 12 V / 24 V power supply for commercial‑vehicles and CAN‑bus communication. This cable is compatible with ...
OBD‑II 16‑pin Male to OBD‑II 16‑pin Female with RJ45 Network Port
The cable is equipped with an additional RJ45 network port, enabling communication between vehicle CAN bus, automotive‑Ethernet and standard IP networks. It supports high‑speed DoIP diagnostics and network‑based transmission of vehicle data. This cable is dedicated to BMW ENET and new‑energy‑vehicle ...
