OBD‑II Female Adapter Cable
The connector housing adopts PA66 material with flame rating UL94 V‑0. The cable is constructed from PUR material, featuring oil‑corrosion resistance, UV‑resistance and crack‑resistance under repeated‑bending. This cable is compatible with automotive‑diagnostic tooling and production‑line test ...
EV Relay Wire Harness
Main contactors for high‑power charging of AEV / EV‑B, adopting 2‑core standard cables equipped with Yakazi (7282‑1020) connectors. No wire modification or adapter conversion required, delivering zero‑assembly tolerance error. The cable model complies with UL3266, 22 AWG, constructed with XLPE ...
EE‑SX674‑WR Photoelectric Switch Cable
Integrated U‑shaped slot with integrated emitter and receiver, slot width 5 mm, capable of detecting thin blocking sheets ≥ 2 × 0.8 mm; clearance tolerance ≤ 0.025 mm, ultra‑high positioning repeatability with zero offset for home‑position limit. Adopts 940 nm DC infrared‑light source, resistant to ...
D‑Sub 9‑pin RS232 Serial Connection Cable
The connector is fitted with built‑in metal fixing screws at both ends. After tightening, it will not loosen due to vibration or pulling force, which is suitable for permanent‑fixed wiring, on‑board vehicle equipment and high‑vibration working environments. Adopting industrial‑grade galvanized full...
GH1.25‑9P Terminal Wire Harness
1.25mm ultra-fine single-row connector for weak-current signals and low-power auxiliary power supply. Features locking structure to prevent disconnection and misinsertion with low mating force. 28 AWG wire, 500 mA operating current, -40 to +80℃ temperature range.
Energy‑storage Cabinet Inter‑cabinet Communication Harness
CAN, RS485 Signal Assembly + Power Supply and Fan Power Harness. Features 16/20 AWG wires, IP67 rating, -40 to +105℃ range, 300V rating, 3A current, 3m length, 8-pin wire-to-wire connectors with PVC insulation and tinned copper conductors.
Energy‑Storage High‑Voltage Box Connector Wire Harness
High Voltage Box Connector Harness for energy storage with 6+8 pin wire-to-board design. Features silicone/XLPE insulation, tinned copper conductors, IP67 rating, and operates from -40 to +150℃. Supports 300V rated voltage with low-loss crown spring terminals (<0.5 mΩ contact resistance) for high-current transmission up to 250A.
XT60 (2+2) Power Cable
High-current power + low-voltage signal integrated cable with 60A power pins and ≤1A signal pins. Features PA66 housing (UL94 V0), -40 to +150℃ range, and physical isolation to prevent interference between power and communication signals.
