cablaggio

Cavo impermeabile da M12A-04P-A a M8A-04P per collegamenti sensore/attuatore. Presenta grado di protezione IP67, contatti placcati in oro per bassa resistenza, alloggiamento in PA66 e stampaggio a iniezione a due fasi per una maggiore durata in ambienti da -20 a +80 ℃.

Characteristic impedance of the product is 50Ω (75Ω customizable). Operating frequency: DC to GHz. It features low VSWR: standard ≤1.5. The cable boasts high voltage resistance and low leakage, with excellent RF signal isolation to suppress outward radiation interference. Matched with RG316 coaxial cable, it delivers high temperature resistance and low signal loss. An additional power wire is integrated to supply power to instruments simultaneously.

This single‑end D‑Sub 25PIN splitter harness features one cable diverging into two branches. It terminates with a D‑Sub 15PIN signal channel and a standalone coaxial RF line with D‑Sub 9PIN connectors, enabling simultaneous transmission of serial control signals, analog video signals and high‑frequency RF signals. The communication cable adopts a double composite shielding structure to deliver robust resistance against EMI and RFI interference. Coaxial cables are available in

The product is equipped with an additional RJ45 network port, enabling communication between vehicle CAN bus, automotive Ethernet and standard IP networks. It supports high-speed DoIP diagnostics and network-based transmission of vehicle data.

The connector housing adopts PA66 material with flame rating UL94 V‑0. The cable is constructed from PUR material, featuring oil corrosion resistance, UV resistance and crack resistance under repeated bending.

Main contactors for high-power charging of AEV/EV-B, adopting 2-core standard cables equipped with Yakazi (7282-1020) connectors. No wire modification or adapter conversion required, delivering zero assembly tolerance error. The cable model complies with UL3266, 22AWG, constructed with XLPE halogen-free flame-retardant material. Its maximum operating temperature reaches 125°C, conforming to ELV automotive environmental regulations.

Integrated U-shaped slot with integrated emitter and receiver, slot width 5mm, capable of detecting thin blocking sheets ≥2×0.8mm; clearance tolerance ≤0.025mm, ultra-high positioning repeatability with zero offset for home position limit. Adopts 940nm DC infrared light source, resistant to strong workshop light and fluorescent lamp interference to avoid false triggering. Response time 0.17ms, maximum detection frequency up to 1kHz, suitable for high-speed assembly lines and

The connector is fitted with built‑in metal fixing screws at both ends. After tightening, it will not loosen due to vibration or pulling force, which is suitable for permanent fixed wiring, on‑board vehicle equipment and high‑vibration working environments. Adopting industrial‑grade galvanized full‑metal shielding, it can effectively suppress signal interference. Operating temperature range: −40 to 85 ℃. Withstand voltage: AC 1000V/ 1 min. Insulation resistance: ≥ 1000 MΩ.

8-pin 8-contact Ethernet cable, compatible with multiple cable types including Cat5e, Cat6, Cat6A and Cat7. Its 90-degree bending design drastically saves installation space, ideal for tight mounting against cabinet backplanes with limited clearance. Equipped with 8 gold-plated phosphor bronze pins, it complies with TIA-568 standards: 1 Gbps gigabit transmission for Cat5e and stable 10 Gbps transmission for Cat6A. It supports power supply over Ethernet (PoE / PoE++).

The high-power DC power wiring harness is fully enclosed by a galvanized metal housing. The cable shielding mesh is connected to the housing with single-ended grounding to prevent signal wave interference with communication generated by drivers. It adopts turned gold-plated brass terminals featuring ultra-low contact resistance and small temperature rise during long-term current operation. Single pins support optional current:5-40 A, with a voltage withstand of 250 V DC and

Connettore ultrafine a fila singola da 1,25 mm per segnali a corrente debole e alimentazione ausiliaria a bassa potenza. Presenta una struttura di bloccaggio per impedire la disconnessione e l'errato inserimento con una bassa forza di accoppiamento. Cavo da 28 AWG, corrente operativa 500 mA, intervallo di temperatura da -40 a +80 ℃.

Cavo integrato di alimentazione ad alta corrente + segnale a bassa tensione con pin di alimentazione da 60 A e pin di segnale ≤1 A. Presenta alloggiamento in PA66 (UL94 V0), intervallo da -40 a +150 ℃ e isolamento fisico per prevenire interferenze tra alimentazione e segnali di comunicazione.

Cavo di alimentazione CC classico per montaggio a pannello con pin da 2,1 mm/2,5 mm. L'isolamento in silicone resiste alle alte temperature (da -40 a +150 ℃) e a grandi carichi di corrente (3,0 A, 600 V), offrendo un'eccellente flessibilità. Conduttore in rame stagnato 18AWG, lunghezza 0,12 m.

Cavo di acquisizione segnale batteria serie JAE per veicoli a nuova energia, fotovoltaico e accumulo di energia. Presenta passo da 2,2 mm, struttura di fissaggio, terminali miniaturizzati da 0,64 mm con design a molla a doppio strato, risparmiando spazio e garantendo un contatto affidabile. Conforme agli standard automobilistici LV214.

DF13(1.25mm pitch) double-layer connector can effectively save installation space. HDPE insulation material improves the signal transmission performance of the product. The cable adopts double-shielded(GND) design with twisted-pair core conductors,making the signal transmission quality of the equipment more stable. And it also optimizes the product cost to the greatest extent.

The D-Sub 26PIN connector adopts the industry-standard 3-row 26-pin layout with locking screws, enabling secure direct mounting on equipment panels. The J1939 Type 2 circular connector supports 12V/24V power supply for commercial vehicles and CAN bus communication.

JWPF connectors accommodate cables of 24 AWG to 22 AWG with an insulation outer diameter of φ1.4-1.7 mm. The housing comes with a dual locking system consisting of integrated housing lance terminal locks and internal retaining latches to prevent loosening under vibration conditions.

Il cavo impermeabile per autoveicoli TE Superseal 1.5 presenta grado di protezione IP67, passo da 6,0 mm, design a doppio bloccaggio e funziona da -40 a +105°C. Con un conduttore in rame stagnato da 18 AWG e una tensione nominale di 600 V, offre prestazioni di costo ottimali e la massima affidabilità per l'elettronica automobilistica.

Cavo RF da FAKRA a IPEX per sistemi wireless automobilistici (GPS/navigazione/ADAS). Presenta conduttori in rame argentato, contatti placcati oro, grado di protezione IP67 e supporta la trasmissione del segnale 6G. Intervallo operativo da -40 a +80°C.

Il cavo adattatore da HSD-4P-M a HSD-4P-F è dotato di impedenza di 100 Ω, grado di impermeabilità IP67 e schermatura metallica a 360° per anti-EMI. Resiste da -40 a +125℃, conforme agli standard LV214/USCAR. Ideale per dati automobilistici ad alta velocità, trasmissione video e interfacce diagnostiche.