chicote de fios

Cabo à prova d'água M12A-04P-A a M8A-04P para conexões de sensor/atuador. Possui classificação IP67, contatos banhados a ouro para baixa resistência, invólucro PA66 e moldagem por injeção de dois disparos para durabilidade em ambientes de -20 a +80°C.

Characteristic impedance of the product is 50Ω (75Ω customizable). Operating frequency: DC to GHz. It features low VSWR: standard ≤1.5. The cable boasts high voltage resistance and low leakage, with excellent RF signal isolation to suppress outward radiation interference. Matched with RG316 coaxial cable, it delivers high temperature resistance and low signal loss. An additional power wire is integrated to supply power to instruments simultaneously.

This single‑end D‑Sub 25PIN splitter harness features one cable diverging into two branches. It terminates with a D‑Sub 15PIN signal channel and a standalone coaxial RF line with D‑Sub 9PIN connectors, enabling simultaneous transmission of serial control signals, analog video signals and high‑frequency RF signals. The communication cable adopts a double composite shielding structure to deliver robust resistance against EMI and RFI interference. Coaxial cables are available in

The product is equipped with an additional RJ45 network port, enabling communication between vehicle CAN bus, automotive Ethernet and standard IP networks. It supports high-speed DoIP diagnostics and network-based transmission of vehicle data.

The connector housing adopts PA66 material with flame rating UL94 V‑0. The cable is constructed from PUR material, featuring oil corrosion resistance, UV resistance and crack resistance under repeated bending.

Main contactors for high-power charging of AEV/EV-B, adopting 2-core standard cables equipped with Yakazi (7282-1020) connectors. No wire modification or adapter conversion required, delivering zero assembly tolerance error. The cable model complies with UL3266, 22AWG, constructed with XLPE halogen-free flame-retardant material. Its maximum operating temperature reaches 125°C, conforming to ELV automotive environmental regulations.

Integrated U-shaped slot with integrated emitter and receiver, slot width 5mm, capable of detecting thin blocking sheets ≥2×0.8mm; clearance tolerance ≤0.025mm, ultra-high positioning repeatability with zero offset for home position limit. Adopts 940nm DC infrared light source, resistant to strong workshop light and fluorescent lamp interference to avoid false triggering. Response time 0.17ms, maximum detection frequency up to 1kHz, suitable for high-speed assembly lines and

The connector is fitted with built‑in metal fixing screws at both ends. After tightening, it will not loosen due to vibration or pulling force, which is suitable for permanent fixed wiring, on‑board vehicle equipment and high‑vibration working environments. Adopting industrial‑grade galvanized full‑metal shielding, it can effectively suppress signal interference. Operating temperature range: −40 to 85 ℃. Withstand voltage: AC 1000V/ 1 min. Insulation resistance: ≥ 1000 MΩ.

8-pin 8-contact Ethernet cable, compatible with multiple cable types including Cat5e, Cat6, Cat6A and Cat7. Its 90-degree bending design drastically saves installation space, ideal for tight mounting against cabinet backplanes with limited clearance. Equipped with 8 gold-plated phosphor bronze pins, it complies with TIA-568 standards: 1 Gbps gigabit transmission for Cat5e and stable 10 Gbps transmission for Cat6A. It supports power supply over Ethernet (PoE / PoE++).

The high-power DC power wiring harness is fully enclosed by a galvanized metal housing. The cable shielding mesh is connected to the housing with single-ended grounding to prevent signal wave interference with communication generated by drivers. It adopts turned gold-plated brass terminals featuring ultra-low contact resistance and small temperature rise during long-term current operation. Single pins support optional current:5-40 A, with a voltage withstand of 250 V DC and

Conector ultrafino de linha única de 1,25 mm para sinais de corrente fraca e fonte de alimentação auxiliar de baixa potência. Possui estrutura de travamento para evitar desconexão e inserção incorreta com baixa força de acoplamento. Fio 28 AWG, corrente operacional de 500 mA, faixa de temperatura de -40 a +80°C.

Cabo integrado de alimentação de alta corrente + sinal de baixa tensão com pinos de alimentação de 60A e pinos de sinal ≤1A. Possui invólucro PA66 (UL94 V0), faixa de -40 a +150°C e isolamento físico para evitar interferência entre sinais de alimentação e comunicação.

Cabo de alimentação CC clássico para montagem em painel com pinos de 2,1 mm/2,5 mm. O isolamento de silicone suporta altas temperaturas (-40 a +150°C) e grandes cargas de corrente (3,0A, 600V), oferecendo excelente flexibilidade. Condutor de cobre estanhado 18AWG, 0,12m de comprimento.

Cabo de aquisição de sinal de bateria da série JAE para veículos de energia nova, energia fotovoltaica e armazenamento de energia. Possui passo de 2,2 mm, estrutura de retenção, terminais miniaturizados de 0,64 mm com design de mola de camada dupla, economizando espaço e garantindo contato confiável. Está em conformidade com os padrões automotivos LV214.

DF13(1.25mm pitch) double-layer connector can effectively save installation space. HDPE insulation material improves the signal transmission performance of the product. The cable adopts double-shielded(GND) design with twisted-pair core conductors,making the signal transmission quality of the equipment more stable. And it also optimizes the product cost to the greatest extent.

The D-Sub 26PIN connector adopts the industry-standard 3-row 26-pin layout with locking screws, enabling secure direct mounting on equipment panels. The J1939 Type 2 circular connector supports 12V/24V power supply for commercial vehicles and CAN bus communication.

JWPF connectors accommodate cables of 24 AWG to 22 AWG with an insulation outer diameter of φ1.4-1.7 mm. The housing comes with a dual locking system consisting of integrated housing lance terminal locks and internal retaining latches to prevent loosening under vibration conditions.

O cabo automotivo à prova d'água TE Superseal 1.5 possui classificação IP67, passo de 6,0 mm, design de travamento duplo e opera de -40 a +105°C. Com condutor de cobre estanhado 18 AWG e classificação de 600 V, oferece ótimo desempenho de custo e máxima confiabilidade para eletrônicos automotivos.

Cabo RF FAKRA para IPEX para sistemas sem fio automotivos (GPS/navegação/ADAS). Possui condutores de cobre banhados a prata, contatos banhados a ouro, classificação IP67 e suporta transmissão de sinal 6G. Faixa de operação -40 a +80°C.

O cabo adaptador HSD-4P-M para HSD-4P-F possui impedância de 100 Ω, classificação à prova d'água IP67 e blindagem metálica de 360° para anti-EMI. Suporta -40 a +125°C, em conformidade com os padrões LV214/USCAR. Ideal para dados automotivos de alta velocidade, transmissão de vídeo e interfaces de diagnóstico.