mazo de cables

Cable impermeable M12A-04P-A a M8A-04P para conexiones de sensor/actuador. Cuenta con clasificación IP67, contactos chapados en oro para baja resistencia, carcasa PA66 y moldeado por inyección de dos disparos para mayor durabilidad en entornos de -20 a +80 ℃.

Characteristic impedance of the product is 50Ω (75Ω customizable). Operating frequency: DC to GHz. It features low VSWR: standard ≤1.5. The cable boasts high voltage resistance and low leakage, with excellent RF signal isolation to suppress outward radiation interference. Matched with RG316 coaxial cable, it delivers high temperature resistance and low signal loss. An additional power wire is integrated to supply power to instruments simultaneously.

This single‑end D‑Sub 25PIN splitter harness features one cable diverging into two branches. It terminates with a D‑Sub 15PIN signal channel and a standalone coaxial RF line with D‑Sub 9PIN connectors, enabling simultaneous transmission of serial control signals, analog video signals and high‑frequency RF signals. The communication cable adopts a double composite shielding structure to deliver robust resistance against EMI and RFI interference. Coaxial cables are available in

The product is equipped with an additional RJ45 network port, enabling communication between vehicle CAN bus, automotive Ethernet and standard IP networks. It supports high-speed DoIP diagnostics and network-based transmission of vehicle data.

The connector housing adopts PA66 material with flame rating UL94 V‑0. The cable is constructed from PUR material, featuring oil corrosion resistance, UV resistance and crack resistance under repeated bending.

Main contactors for high-power charging of AEV/EV-B, adopting 2-core standard cables equipped with Yakazi (7282-1020) connectors. No wire modification or adapter conversion required, delivering zero assembly tolerance error. The cable model complies with UL3266, 22AWG, constructed with XLPE halogen-free flame-retardant material. Its maximum operating temperature reaches 125°C, conforming to ELV automotive environmental regulations.

Integrated U-shaped slot with integrated emitter and receiver, slot width 5mm, capable of detecting thin blocking sheets ≥2×0.8mm; clearance tolerance ≤0.025mm, ultra-high positioning repeatability with zero offset for home position limit. Adopts 940nm DC infrared light source, resistant to strong workshop light and fluorescent lamp interference to avoid false triggering. Response time 0.17ms, maximum detection frequency up to 1kHz, suitable for high-speed assembly lines and

The connector is fitted with built‑in metal fixing screws at both ends. After tightening, it will not loosen due to vibration or pulling force, which is suitable for permanent fixed wiring, on‑board vehicle equipment and high‑vibration working environments. Adopting industrial‑grade galvanized full‑metal shielding, it can effectively suppress signal interference. Operating temperature range: −40 to 85 ℃. Withstand voltage: AC 1000V/ 1 min. Insulation resistance: ≥ 1000 MΩ.

8-pin 8-contact Ethernet cable, compatible with multiple cable types including Cat5e, Cat6, Cat6A and Cat7. Its 90-degree bending design drastically saves installation space, ideal for tight mounting against cabinet backplanes with limited clearance. Equipped with 8 gold-plated phosphor bronze pins, it complies with TIA-568 standards: 1 Gbps gigabit transmission for Cat5e and stable 10 Gbps transmission for Cat6A. It supports power supply over Ethernet (PoE / PoE++).

The high-power DC power wiring harness is fully enclosed by a galvanized metal housing. The cable shielding mesh is connected to the housing with single-ended grounding to prevent signal wave interference with communication generated by drivers. It adopts turned gold-plated brass terminals featuring ultra-low contact resistance and small temperature rise during long-term current operation. Single pins support optional current:5-40 A, with a voltage withstand of 250 V DC and

Conector ultrafino de una sola fila de 1,25 mm para señales de corriente débil y fuente de alimentación auxiliar de baja potencia. Cuenta con una estructura de bloqueo para evitar la desconexión y la mala inserción con baja fuerza de acoplamiento. Cable de 28 AWG, corriente de funcionamiento de 500 mA, rango de temperatura de -40 a +80 ℃.

Cable integrado de potencia de alta corriente + señal de bajo voltaje con pines de alimentación de 60 A y pines de señal ≤1 A. Cuenta con carcasa PA66 (UL94 V0), rango de -40 a +150 ℃ y aislamiento físico para evitar interferencias entre las señales de alimentación y comunicación.

Cable de alimentación CC clásico para montaje en panel con clavijas de 2,1 mm/2,5 mm. El aislamiento de silicona soporta altas temperaturas (-40 a +150 ℃) y grandes cargas de corriente (3,0 A, 600 V), ofreciendo una excelente flexibilidad. Conductor de cobre estañado 18AWG, 0,12 m de longitud.

Cable de Adquisición de Señal de Batería Serie JAE para vehículos de nuevas energías, fotovoltaica y almacenamiento de energía. Cuenta con paso de 2,2 mm, estructura de retención y terminales miniaturizados de 0,64 mm con diseño de resorte de doble capa, lo que ahorra espacio y garantiza un contacto confiable. Cumple con los estándares automotrices LV214.

DF13(1.25mm pitch) double-layer connector can effectively save installation space. HDPE insulation material improves the signal transmission performance of the product. The cable adopts double-shielded(GND) design with twisted-pair core conductors,making the signal transmission quality of the equipment more stable. And it also optimizes the product cost to the greatest extent.

The D-Sub 26PIN connector adopts the industry-standard 3-row 26-pin layout with locking screws, enabling secure direct mounting on equipment panels. The J1939 Type 2 circular connector supports 12V/24V power supply for commercial vehicles and CAN bus communication.

JWPF connectors accommodate cables of 24 AWG to 22 AWG with an insulation outer diameter of φ1.4-1.7 mm. The housing comes with a dual locking system consisting of integrated housing lance terminal locks and internal retaining latches to prevent loosening under vibration conditions.

El cable impermeable para automóviles TE Superseal 1.5 tiene clasificación IP67, paso de 6,0 mm, diseño de doble bloqueo y funciona de -40 a +105 °C. Con conductor de cobre estañado de 18 AWG y clasificación de 600 V, ofrece un rendimiento de costos óptimo y máxima confiabilidad para la electrónica automotriz.

Cable RF FAKRA a IPEX para sistemas inalámbricos de automoción (GPS/navegación/ADAS). Cuenta con conductores de cobre chapados en plata, contactos chapados en oro, clasificación IP67 y admite transmisión de señal 6G. Rango de funcionamiento -40 a +80°C.

El cable adaptador HSD-4P-M a HSD-4P-F presenta una impedancia de 100 Ω, clasificación de impermeabilidad IP67 y blindaje metálico de 360° para anti-EMI. Resiste -40 a +125 ℃, cumple con los estándares LV214/USCAR. Ideal para interfaces de diagnóstico, transmisión de vídeo y datos de alta velocidad en automóviles.