ワイヤーハーネス

センサー/アクチュエーター接続用のM12A-04P-A～M8A-04P防水ケーブル。 IP67定格、低抵抗の金メッキコンタクト、PA66ハウジング、-20～+80℃の環境での耐久性を備えたツーショット射出成形が特徴です。

Characteristic impedance of the product is 50Ω (75Ω customizable). Operating frequency: DC to GHz. It features low VSWR: standard ≤1.5. The cable boasts high voltage resistance and low leakage, with excellent RF signal isolation to suppress outward radiation interference. Matched with RG316 coaxial cable, it delivers high temperature resistance and low signal loss. An additional power wire is integrated to supply power to instruments simultaneously.

This single‑end D‑Sub 25PIN splitter harness features one cable diverging into two branches. It terminates with a D‑Sub 15PIN signal channel and a standalone coaxial RF line with D‑Sub 9PIN connectors, enabling simultaneous transmission of serial control signals, analog video signals and high‑frequency RF signals. The communication cable adopts a double composite shielding structure to deliver robust resistance against EMI and RFI interference. Coaxial cables are available in

The product is equipped with an additional RJ45 network port, enabling communication between vehicle CAN bus, automotive Ethernet and standard IP networks. It supports high-speed DoIP diagnostics and network-based transmission of vehicle data.

The connector housing adopts PA66 material with flame rating UL94 V‑0. The cable is constructed from PUR material, featuring oil corrosion resistance, UV resistance and crack resistance under repeated bending.

Main contactors for high-power charging of AEV/EV-B, adopting 2-core standard cables equipped with Yakazi (7282-1020) connectors. No wire modification or adapter conversion required, delivering zero assembly tolerance error. The cable model complies with UL3266, 22AWG, constructed with XLPE halogen-free flame-retardant material. Its maximum operating temperature reaches 125°C, conforming to ELV automotive environmental regulations.

Integrated U-shaped slot with integrated emitter and receiver, slot width 5mm, capable of detecting thin blocking sheets ≥2×0.8mm; clearance tolerance ≤0.025mm, ultra-high positioning repeatability with zero offset for home position limit. Adopts 940nm DC infrared light source, resistant to strong workshop light and fluorescent lamp interference to avoid false triggering. Response time 0.17ms, maximum detection frequency up to 1kHz, suitable for high-speed assembly lines and

The connector is fitted with built‑in metal fixing screws at both ends. After tightening, it will not loosen due to vibration or pulling force, which is suitable for permanent fixed wiring, on‑board vehicle equipment and high‑vibration working environments. Adopting industrial‑grade galvanized full‑metal shielding, it can effectively suppress signal interference. Operating temperature range: −40 to 85 ℃. Withstand voltage: AC 1000V/ 1 min. Insulation resistance: ≥ 1000 MΩ.

8-pin 8-contact Ethernet cable, compatible with multiple cable types including Cat5e, Cat6, Cat6A and Cat7. Its 90-degree bending design drastically saves installation space, ideal for tight mounting against cabinet backplanes with limited clearance. Equipped with 8 gold-plated phosphor bronze pins, it complies with TIA-568 standards: 1 Gbps gigabit transmission for Cat5e and stable 10 Gbps transmission for Cat6A. It supports power supply over Ethernet (PoE / PoE++).

The high-power DC power wiring harness is fully enclosed by a galvanized metal housing. The cable shielding mesh is connected to the housing with single-ended grounding to prevent signal wave interference with communication generated by drivers. It adopts turned gold-plated brass terminals featuring ultra-low contact resistance and small temperature rise during long-term current operation. Single pins support optional current:5-40 A, with a voltage withstand of 250 V DC and

微弱電流信号および低電力補助電源用の1.25mm極細単列コネクタ。低い嵌合力で抜けや誤挿入を防止するロック構造を採用しています。 28 AWG ワイヤ、動作電流 500 mA、温度範囲 -40 ～ +80℃。

60A の電源ピンと 1A 以下の信号ピンを備えた大電流電源 + 低電圧信号統合ケーブル。 PA66ハウジング（UL94 V0）、-40～+150℃の範囲、および電源と通信信号間の干渉を防ぐ物理的絶縁が特徴です。

2.1mm/2.5mmピンを備えたクラシックなパネルマウントDC電源ケーブル。シリコーン絶縁は高温（-40～+150℃）、大電流負荷（3.0A、600V）に耐え、柔軟性に優れています。 18AWG 錫メッキ銅導体、長さ 0.12m。

新エネルギー自動車、太陽光発電およびエネルギー貯蔵用の JAE シリーズ バッテリー信号取得ケーブル。 2.2mmピッチ、リテーナ構造、2層スプリング設計の小型0.64mm端子を採用し、省スペースで確実な接触を実現します。 LV214自動車規格に準拠。

DF13(1.25mm pitch) double-layer connector can effectively save installation space. HDPE insulation material improves the signal transmission performance of the product. The cable adopts double-shielded(GND) design with twisted-pair core conductors,making the signal transmission quality of the equipment more stable. And it also optimizes the product cost to the greatest extent.

The D-Sub 26PIN connector adopts the industry-standard 3-row 26-pin layout with locking screws, enabling secure direct mounting on equipment panels. The J1939 Type 2 circular connector supports 12V/24V power supply for commercial vehicles and CAN bus communication.

JWPF connectors accommodate cables of 24 AWG to 22 AWG with an insulation outer diameter of φ1.4-1.7 mm. The housing comes with a dual locking system consisting of integrated housing lance terminal locks and internal retaining latches to prevent loosening under vibration conditions.

TE Superseal 1.5 自動車用防水ケーブルは、IP67 定格、6.0 mm ピッチ、デュアル ロック設計を特徴とし、-40 ～ +105 °C で動作します。 18 AWG 錫メッキ銅導体と 600 V 定格により、自動車エレクトロニクスに最適なコストパフォーマンスと最大の信頼性を提供します。

車載無線システム (GPS/ナビゲーション/ADAS) 用の FAKRA - IPEX RF ケーブル。銀メッキ銅導体、金メッキ接点、IP67 定格を備え、6G 信号伝送をサポートします。動作範囲は-40～+80℃。

HSD-4P-M から HSD-4P-F へのアダプタ ケーブルは、100 Ω インピーダンス、IP67 防水定格、および EMI 防止のための 360° 金属シールドを備えています。 -40～+125℃に耐え、LV214/USCAR規格に準拠。自動車の高速データ、ビデオ伝送、診断インターフェイスに最適です。