通信ケーブル
JAEシリーズ バッテリー信号取得ケーブル
新エネルギー自動車、太陽光発電およびエネルギー貯蔵用の JAE シリーズ バッテリー信号取得ケーブル。 2.2mmピッチ、リテーナ構造、2層スプリング設計の小型0.64mm端子を採用し、省スペースで確実な接触を実現します。 LV214自動車規格に準拠。
RJ45 8P8C ネットワーク ケーブル
8-pin 8-contact Ethernet cable, compatible with multiple cable types including Cat5e, Cat6, Cat6A and Cat7. Its 90-degree bending design drastically saves installation space, ideal for tight mounting against cabinet backplanes with limited clearance. Equipped with 8 gold-plated phosphor bronze pins, ...
USB BF - PH1.25-4P 通信ケーブル
The contacts of USB‑BF are gold‑plated for anti‑oxidation performance, with a mating durability of ≥10,000 insert‑pull cycles. Built‑in M3 nuts inside the plug enable direct mounting onto equipment enclosures and industrial‑control panels with M3 screws. This USB 2.0 connector supports a transfer ...
SF1210/P3 ～ PT100 温度センサー
SF12 push-pull self-locking circular connector perfectly matches 3-wire PT100 platinum resistance sensors. It features a resistance value of 100 Ω at 0°C and complies with the IEC 60751 standard. The 3-wire design eliminates resistance errors caused by connecting cables. Built with a 1210 packaged ...
TPU/PUR コイル状ケーブル
Constructed from TPU/PUR materials. The static coiled cable can stretch to 3–5 times its original length and retracts automatically and promptly upon release. Its rated voltage stands at 300/500 V, compatible with low-voltage signal transmission and power supply. The cable maintains stable ...
SMA RF/電源複合ケーブル
Characteristic impedance of the product is 50Ω (75Ω customizable). Operating frequency: DC to GHz. It features low VSWR: standard ≤1.5. The cable boasts high voltage resistance and low leakage, with excellent RF signal isolation to suppress outward radiation interference. Matched with RG316 coaxial ...
HD19-9-1939S80 - D-Sub 26PIN 診断ケーブル
The D-Sub 26PIN connector adopts the industry-standard 3-row 26-pin layout with locking screws, enabling secure direct mounting on equipment panels. The J1939 Type 2 circular connector supports 12V/24V power supply for commercial vehicles and CAN bus communication. This cable is compatible with ...
D-Sub 25PIN - D-Sub 15PIN + D-Sub 9PIN 二重シールド/同軸ケーブル
This single‑end D‑Sub 25PIN splitter harness features one cable diverging into two branches. It terminates with a D‑Sub 15PIN signal channel and a standalone coaxial RF line with D‑Sub 9PIN connectors, enabling simultaneous transmission of serial control signals, analog video signals and high...
OBD II 16PIN オス - OBD II 16PIN メス + RJ45 ネットワーク ポート
The product is equipped with an additional RJ45 network port, enabling communication between vehicle CAN bus, automotive Ethernet and standard IP networks. It supports high-speed DoIP diagnostics and network-based transmission of vehicle data. This cable is dedicated to BMW ENET and New Energy ...
OBD II メスアダプターハーネス
The connector housing adopts PA66 material with flame rating UL94 V‑0. The cable is constructed from PUR material, featuring oil corrosion resistance, UV resistance and crack resistance under repeated bending. This cable is compatible with automotive diagnostic tooling and production line test ...
EV リレーワイヤリング ハーネス
Main contactors for high-power charging of AEV/EV-B, adopting 2-core standard cables equipped with Yakazi (7282-1020) connectors. No wire modification or adapter conversion required, delivering zero assembly tolerance error. The cable model complies with UL3266, 22AWG, constructed with XLPE halogen...
EE-SX674-WR 光電センサケーブル
Integrated U-shaped slot with integrated emitter and receiver, slot width 5mm, capable of detecting thin blocking sheets ≥2×0.8mm; clearance tolerance ≤0.025mm, ultra-high positioning repeatability with zero offset for home position limit. Adopts 940nm DC infrared light source, resistant to strong ...
D-Sub 9PIN RS232 シリアル ケーブル
The connector is fitted with built‑in metal fixing screws at both ends. After tightening, it will not loosen due to vibration or pulling force, which is suitable for permanent fixed wiring, on‑board vehicle equipment and high‑vibration working environments. Adopting industrial‑grade galvanized full...
JWPF-4P ターミナルワイヤーハーネス
JWPF connectors accommodate cables of 24 AWG to 22 AWG with an insulation outer diameter of φ1.4-1.7 mm. The housing comes with a dual locking system consisting of integrated housing lance terminal locks and internal retaining latches to prevent loosening under vibration conditions. This cable is ...
GH1.25-9P ターミナルワイヤーハーネス
微弱電流信号および低電力補助電源用の1.25mm極細単列コネクタ。低い嵌合力で抜けや誤挿入を防止するロック構造を採用しています。 28 AWG ワイヤ、動作電流 500 mA、温度範囲 -40 ～ +80℃。
キャビネット間通信ワイヤーハーネス
CAN、RS485 信号アセンブリ + 電源およびファン電源ハーネス。 16/20 AWG ワイヤ、IP67 定格、-40 ～ +105℃ 範囲、300V 定格、3A 電流、3m 長さ、PVC 絶縁体と錫メッキ銅導体を備えた 8 ピン電線対電線コネクタが特徴です。
