Cable de communication

Câble d'acquisition de signal de batterie série JAE pour les véhicules à énergie nouvelle, le photovoltaïque et le stockage d'énergie. Comprend un pas de 2,2 mm, une structure de retenue, des bornes miniaturisées de 0,64 mm avec une conception à ressort à double couche, économisant de l'espace et assurant un contact fiable. Conforme aux normes automobiles LV214.

8-pin 8-contact Ethernet cable, compatible with multiple cable types including Cat5e, Cat6, Cat6A and Cat7. Its 90-degree bending design drastically saves installation space, ideal for tight mounting against cabinet backplanes with limited clearance. Equipped with 8 gold-plated phosphor bronze pins, ...

The contacts of USB‑BF are gold‑plated for anti‑oxidation performance, with a mating durability of ≥10,000 insert‑pull cycles. Built‑in M3 nuts inside the plug enable direct mounting onto equipment enclosures and industrial‑control panels with M3 screws. This USB 2.0 connector supports a transfer ...

SF12 push-pull self-locking circular connector perfectly matches 3-wire PT100 platinum resistance sensors. It features a resistance value of 100 Ω at 0°C and complies with the IEC 60751 standard. The 3-wire design eliminates resistance errors caused by connecting cables. Built with a 1210 packaged ...

Constructed from TPU/PUR materials. The static coiled cable can stretch to 3–5 times its original length and retracts automatically and promptly upon release. Its rated voltage stands at 300/500 V, compatible with low-voltage signal transmission and power supply. The cable maintains stable ...

Characteristic impedance of the product is 50Ω (75Ω customizable). Operating frequency: DC to GHz. It features low VSWR: standard ≤1.5. The cable boasts high voltage resistance and low leakage, with excellent RF signal isolation to suppress outward radiation interference. Matched with RG316 coaxial ...

The D-Sub 26PIN connector adopts the industry-standard 3-row 26-pin layout with locking screws, enabling secure direct mounting on equipment panels. The J1939 Type 2 circular connector supports 12V/24V power supply for commercial vehicles and CAN bus communication. This cable is compatible with ...

This single‑end D‑Sub 25PIN splitter harness features one cable diverging into two branches. It terminates with a D‑Sub 15PIN signal channel and a standalone coaxial RF line with D‑Sub 9PIN connectors, enabling simultaneous transmission of serial control signals, analog video signals and high...

The product is equipped with an additional RJ45 network port, enabling communication between vehicle CAN bus, automotive Ethernet and standard IP networks. It supports high-speed DoIP diagnostics and network-based transmission of vehicle data. This cable is dedicated to BMW ENET and New Energy ...

The connector housing adopts PA66 material with flame rating UL94 V‑0. The cable is constructed from PUR material, featuring oil corrosion resistance, UV resistance and crack resistance under repeated bending. This cable is compatible with automotive diagnostic tooling and production line test ...

Main contactors for high-power charging of AEV/EV-B, adopting 2-core standard cables equipped with Yakazi (7282-1020) connectors. No wire modification or adapter conversion required, delivering zero assembly tolerance error. The cable model complies with UL3266, 22AWG, constructed with XLPE halogen...

Integrated U-shaped slot with integrated emitter and receiver, slot width 5mm, capable of detecting thin blocking sheets ≥2×0.8mm; clearance tolerance ≤0.025mm, ultra-high positioning repeatability with zero offset for home position limit. Adopts 940nm DC infrared light source, resistant to strong ...

The connector is fitted with built‑in metal fixing screws at both ends. After tightening, it will not loosen due to vibration or pulling force, which is suitable for permanent fixed wiring, on‑board vehicle equipment and high‑vibration working environments. Adopting industrial‑grade galvanized full...

JWPF connectors accommodate cables of 24 AWG to 22 AWG with an insulation outer diameter of φ1.4-1.7 mm. The housing comes with a dual locking system consisting of integrated housing lance terminal locks and internal retaining latches to prevent loosening under vibration conditions. This cable is ...

Connecteur ultra-fin à une rangée de 1,25 mm pour les signaux à courant faible et l'alimentation auxiliaire de faible puissance. Dispose d'une structure de verrouillage pour éviter la déconnexion et la mauvaise insertion avec une faible force d'accouplement. Fil 28 AWG, courant de fonctionnement 500 mA, plage de température de -40 à +80 ℃.

Ensemble de signaux CAN, RS485 + alimentation et faisceau d'alimentation du ventilateur. Comprend des fils 16/20 AWG, un indice de protection IP67, une plage de -40 à +105 ℃, un indice de 300 V, un courant de 3 A, une longueur de 3 m, des connecteurs fil à fil à 8 broches avec isolation en PVC et conducteurs en cuivre étamé.