Cabo de comunicação

The contacts of USB‑BF are gold‑plated for anti‑oxidation performance, with a mating durability of ≥ 10,000 insert‑pull cycles. Built‑in M3 nuts inside the plug enable direct mounting onto equipment enclosures and industrial‑control panels with M3 screws. This USB 2.0 connector supports a transfer ...

SF12 push‑pull self‑locking circular connector perfectly matches 3‑wire PT100 platinum‑resistance sensors. It features a resistance value of 100 Ω at 0 °C and complies with the IEC 60751 standard. The 3‑wire design eliminates resistance errors caused by connecting cables. Built with a 1210‑packaged ...

Constructed from TPU / PUR materials. The static coiled cable can stretch to 3‑5 times its original length and retracts automatically and promptly upon release. Its rated voltage stands at 300 / 500 V, compatible with low‑voltage signal transmission and power supply. The cable maintains stable ...

Characteristic impedance of the product is 50 Ω (75 Ω customizable). Operating frequency: DC to GHz. It features low VSWR: standard ≤ 1.5. The cable boasts high‑voltage resistance and low leakage, with excellent RF‑signal isolation to suppress outward‑radiation interference. Matched with RG316 ...

This single‑end D‑Sub 25‑PIN splitter harness features one cable diverging into two branches. It terminates with a D‑Sub 15‑PIN signal channel and a standalone coaxial RF line with D‑Sub 9‑PIN connectors, enabling simultaneous transmission of serial‑control signals, analog‑video signals and high...

The D‑Sub 26‑PIN connector adopts the industry‑standard 3‑row 26‑pin layout with locking screws, enabling secure direct mounting on equipment panels. The J1939 Type 2 circular connector supports 12 V / 24 V power supply for commercial‑vehicles and CAN‑bus communication. This cable is compatible with ...

The cable is equipped with an additional RJ45 network port, enabling communication between vehicle CAN bus, automotive‑Ethernet and standard IP networks. It supports high‑speed DoIP diagnostics and network‑based transmission of vehicle data. This cable is dedicated to BMW ENET and new‑energy‑vehicle ...

The connector housing adopts PA66 material with flame rating UL94 V‑0. The cable is constructed from PUR material, featuring oil‑corrosion resistance, UV‑resistance and crack‑resistance under repeated‑bending. This cable is compatible with automotive‑diagnostic tooling and production‑line test ...

Main contactors for high‑power charging of AEV / EV‑B, adopting 2‑core standard cables equipped with Yakazi (7282‑1020) connectors. No wire modification or adapter conversion required, delivering zero‑assembly tolerance error. The cable model complies with UL3266, 22 AWG, constructed with XLPE ...

Integrated U‑shaped slot with integrated emitter and receiver, slot width 5 mm, capable of detecting thin blocking sheets ≥ 2 × 0.8 mm; clearance tolerance ≤ 0.025 mm, ultra‑high positioning repeatability with zero offset for home‑position limit. Adopts 940 nm DC infrared‑light source, resistant to ...

The connector is fitted with built‑in metal fixing screws at both ends. After tightening, it will not loosen due to vibration or pulling force, which is suitable for permanent‑fixed wiring, on‑board vehicle equipment and high‑vibration working environments. Adopting industrial‑grade galvanized full...

Conector ultrafino de linha única de 1,25 mm para sinais de corrente fraca e fonte de alimentação auxiliar de baixa potência. Possui estrutura de travamento para evitar desconexão e inserção incorreta com baixa força de acoplamento. Fio 28 AWG, corrente operacional de 500 mA, faixa de temperatura de -40 a +80°C.

CAN, conjunto de sinal RS485 + fonte de alimentação e chicote de alimentação do ventilador. Possui fios 16/20 AWG, classificação IP67, faixa de -40 a +105 ℃, classificação de 300 V, corrente de 3 A, comprimento de 3 m, conectores fio a fio de 8 pinos com isolamento de PVC e condutores de cobre estanhado.

Cabo de aquisição de sinal de bateria da série JAE para veículos de energia nova, energia fotovoltaica e armazenamento de energia. Possui passo de 2,2 mm, estrutura de retenção, terminais miniaturizados de 0,64 mm com design de mola de camada dupla, economizando espaço e garantindo contato confiável. Está em conformidade com os padrões automotivos LV214.

JWPF connectors accommodate cables of 24 AWG to 22 AWG with an insulation outer diameter of φ1.4-1.7 mm. The housing comes with a dual locking system consisting of integrated housing lance terminal locks and internal retaining latches to prevent loosening under vibration conditions. This cable is ...

8-pin 8-contact Ethernet cable, compatible with multiple cable types including Cat5e, Cat6, Cat6A and Cat7. Its 90-degree bending design drastically saves installation space, ideal for tight mounting against cabinet backplanes with limited clearance. Equipped with 8 gold-plated phosphor bronze pins, ...