Cables de comunicación

Cable de Adquisición de Señal de Batería Serie JAE para vehículos de nuevas energías, fotovoltaica y almacenamiento de energía. Cuenta con paso de 2,2 mm, estructura de retención y terminales miniaturizados de 0,64 mm con diseño de resorte de doble capa, lo que ahorra espacio y garantiza un contacto confiable. Cumple con los estándares automotrices LV214.

8-pin 8-contact Ethernet cable, compatible with multiple cable types including Cat5e, Cat6, Cat6A and Cat7. Its 90-degree bending design drastically saves installation space, ideal for tight mounting against cabinet backplanes with limited clearance. Equipped with 8 gold-plated phosphor bronze pins, ...

The contacts of USB‑BF are gold‑plated for anti‑oxidation performance, with a mating durability of ≥10,000 insert‑pull cycles. Built‑in M3 nuts inside the plug enable direct mounting onto equipment enclosures and industrial‑control panels with M3 screws. This USB 2.0 connector supports a transfer ...

SF12 push-pull self-locking circular connector perfectly matches 3-wire PT100 platinum resistance sensors. It features a resistance value of 100 Ω at 0°C and complies with the IEC 60751 standard. The 3-wire design eliminates resistance errors caused by connecting cables. Built with a 1210 packaged ...

Constructed from TPU/PUR materials. The static coiled cable can stretch to 3–5 times its original length and retracts automatically and promptly upon release. Its rated voltage stands at 300/500 V, compatible with low-voltage signal transmission and power supply. The cable maintains stable ...

Characteristic impedance of the product is 50Ω (75Ω customizable). Operating frequency: DC to GHz. It features low VSWR: standard ≤1.5. The cable boasts high voltage resistance and low leakage, with excellent RF signal isolation to suppress outward radiation interference. Matched with RG316 coaxial ...

The D-Sub 26PIN connector adopts the industry-standard 3-row 26-pin layout with locking screws, enabling secure direct mounting on equipment panels. The J1939 Type 2 circular connector supports 12V/24V power supply for commercial vehicles and CAN bus communication. This cable is compatible with ...

This single‑end D‑Sub 25PIN splitter harness features one cable diverging into two branches. It terminates with a D‑Sub 15PIN signal channel and a standalone coaxial RF line with D‑Sub 9PIN connectors, enabling simultaneous transmission of serial control signals, analog video signals and high...

The product is equipped with an additional RJ45 network port, enabling communication between vehicle CAN bus, automotive Ethernet and standard IP networks. It supports high-speed DoIP diagnostics and network-based transmission of vehicle data. This cable is dedicated to BMW ENET and New Energy ...

The connector housing adopts PA66 material with flame rating UL94 V‑0. The cable is constructed from PUR material, featuring oil corrosion resistance, UV resistance and crack resistance under repeated bending. This cable is compatible with automotive diagnostic tooling and production line test ...

Main contactors for high-power charging of AEV/EV-B, adopting 2-core standard cables equipped with Yakazi (7282-1020) connectors. No wire modification or adapter conversion required, delivering zero assembly tolerance error. The cable model complies with UL3266, 22AWG, constructed with XLPE halogen...

Integrated U-shaped slot with integrated emitter and receiver, slot width 5mm, capable of detecting thin blocking sheets ≥2×0.8mm; clearance tolerance ≤0.025mm, ultra-high positioning repeatability with zero offset for home position limit. Adopts 940nm DC infrared light source, resistant to strong ...

The connector is fitted with built‑in metal fixing screws at both ends. After tightening, it will not loosen due to vibration or pulling force, which is suitable for permanent fixed wiring, on‑board vehicle equipment and high‑vibration working environments. Adopting industrial‑grade galvanized full...

JWPF connectors accommodate cables of 24 AWG to 22 AWG with an insulation outer diameter of φ1.4-1.7 mm. The housing comes with a dual locking system consisting of integrated housing lance terminal locks and internal retaining latches to prevent loosening under vibration conditions. This cable is ...

Conector ultrafino de una sola fila de 1,25 mm para señales de corriente débil y fuente de alimentación auxiliar de baja potencia. Cuenta con una estructura de bloqueo para evitar la desconexión y la mala inserción con baja fuerza de acoplamiento. Cable de 28 AWG, corriente de funcionamiento de 500 mA, rango de temperatura de -40 a +80 ℃.

Conjunto de señal CAN, RS485 + fuente de alimentación y arnés de alimentación del ventilador. Cuenta con cables 16/20 AWG, clasificación IP67, rango de -40 a +105 ℃, clasificación de 300 V, corriente de 3 A, 3 m de longitud, conectores de cable a cable de 8 pines con aislamiento de PVC y conductores de cobre estañado.